Power, control & automation
15t heavy-lift winch
A 15-tonne SWL hydraulic winch for deep heavy-lift deployment and recovery offshore, designed to DNVGL-ST-0378.
The winch is rated at 15 tonnes SWL on the working layer with around 700 m of wire deployed. It sits at the base of a derrick and feeds wire up to head sheaves.
Equipment
- Hydraulic drive - a piston hydraulic motor through a planetary gearbox, with proportional control via the spool valve.
- Grooved drum & rope - a Lebus-grooved drum sized to the wire’s bend-radius and safe-turn requirements, running a compacted, rotation-resistant heavy-lift rope. The fleet angle lets the winch run without a spooler, with provision for future spooling gear.
- Braking and load-holding - fail-safe, to the DNV offshore lifting-appliance standard. The load is held on loss of power.
- Derrick-base envelope - a base-frame winch dimensioned to fit at the foot of a derrick, with parts commonality to standardise spares across a fleet.
- Pairable for heavier duty - two units can work together, including arrangements where one drum spools the other.
| Parameter | Design basis |
|---|---|
| SWL | 15 t on the working layer at depth (layer-dependent; higher on the first layer) |
| Deployment | ~700 m wire deployed; drum capacity sized well beyond, for pairing/spooling |
| Line speed | ~40 m/min (mid-drum), subject to hydraulic supply |
| Wire | Compacted, rotation-resistant heavy-lift rope (~28 mm class), Lebus-grooved drum |
| Drive | Piston hydraulic motor + planetary gearbox; proportional spool-valve control |
| Braking | Fail-safe braking & load-holding to DNV offshore lifting-appliance standard |
| Standards | DNVGL-ST-0378 (offshore & platform lifting appliances); wire/drum to DNV-OS-D101 / E101 |
Ratings are a design basis confirmed to the duty at enquiry; exact figures and the drive/HPU sizing are set per project. This is a straight heavy-lift winch. For constant-tension or heave-compensated duties see our active constant-tension and active heave compensation winches.