Marine construction

Cantitravel systems for jetty construction

A travelling cantilever frame with a built-in pile gate that builds a jetty from the structure already in place, with no jack-up or floating plant.

A cantitravel runs on rails along the completed structure, cantilevers out over the next bent and holds each pile in its integrated pile gate while it is pitched and driven. When the bent is complete, the whole system slides forward and starts the next.

Equipment

  • Travelling cantilever frame - the structure, rails and bogies, sized for the pile loads and the reach to the next bent.
  • Integrated cantilevered pile gate - hydraulic gate jaws built into the cantilever to hold and position piles to tolerance.
  • Hydraulic sliding system - cylinders and locking pins that move the frame along the rail beams in controlled steps and hold it on inclined runs.
  • Power and control - a dedicated hydraulic power unit and remote walk-around control for each function, with load-holding valves and emergency stops.
  • Marine environment - stainless hydraulic power units, bunded against spills, with components chosen for salt and spray.

Applications

We have engineered the hydraulic sliding and pile gate systems for a 900 t cantitravel, moving it along an inclined jetty in 1.6 m steps.